scaling on cad help mga sir....

mga sir help naman po.... kasi hindi ko ma i set ang scale ko sa cad.. yung scale like 1:50m,1:100m,1:200m. kasi plagi nts ang nangyayari sa plot ko.

sir sa model ba o sa paper space? kung sa model,
scale the object then select base point, sa command line type 100/50 kung 1:50, basta 100 divide ng scale na gusto mo. kung sa paper space meron viewport scaling toolbar open mo na lng. hope nakatulong. hehehe!

sa model space sir, try using 1:1 scale, then, sa layout nlang magset ng scale using viewports. in addition, kahit mga labelings, sa layout n din para convenient.. hehe...

- punta ka layout
- type: mv
- pasok ka mv then type: z
- then type: s (for scale)
- then type: 1/50xp for 1:50, 1/100 for 1:100 and so on.

pero dapat yung sa model mo 1:1 yung scale mo para hindi ka mag ka problema sa pag input ng mga value sa layout pag ginawa mo procedure.
then sa pag print dpat yung title block mo fit sa size ng paper mo. para makuha mo yung tamang scaling.

good luck...hirap mag explain pag di nakikita...wahehe...sana nakatulong ako....

sundin mo ung ky master f-forty one..mg mview ka sa layout den zoom..type mo ung scale na gusto mo..hanapin mo ung model na gusto mo iprint..

Pwede mo rin palitan scale factor mo. Mag "d" ka dn hanapin m scale fact0r.Nakadefault ang 1 f0r 1:100 scale.Pg 1/50 gamit mo gawin m0ng .5 scale fact0r m.Pero bago mo gawin yan mg new ka muna para hnd na mabago ung standard scale.H0pe makatul0ng.

i normally make my scaling procedure on paperspace.
sa modelspace either 1:1 ako and kung medium size project millimeter naman gamit ko.

now let me proceed paano ba ang work flows na gamit ko.

1 . activate viewport toolbar by right clicking on any toolbar, then autocad then viewport ( in case its havent yet activated)


2. assuming you have already all the drawings in model space at 1:1 scale. activate paperspace . i also normally create my title block on paper space at 1:1 also. there are two scenario that might happen in paperspace when you activate it.
a - theres already a viewport
b -theres no viewport ( this is the case if the CREATE VIEWPORT IN A NEW LAYOUT is uncheck at display option)

2a. scenario (a). if theres already a viewport, select it to highlight and its scale will show up on the viewport scale.


from here, you can adjust scale of your drawing base on your preference.


2b. scenario (b) if theres is no viewport on your drawing, just click the icon Single viewport on the viewport toolbar and create one on your paperspace, then proceed with 2a procedure.

-you can also type the scale you want directly to the viewport scale window, 1 for 1:1, .1 for 1:10, .100 for 1:100, .2 for 1:50,
practice both combination like 1:1 scale at model space and 1:1000 (millimeter) in paperspace or vice versa. this will give you more freedom in creating your own workflow on proper scaling.
-So with these, when you plot your drawing, you dont have to think for plot scale just 1:1 ratio
-You can also access the viewport scale on viewport properties, select your vieport and hit Ctl 1.
-Just explore the viewport toolbar and you will learn a lot from there.

thanks for the tutorial sir ronel, youre simply the best.

nice thread sir...thanks for posting your inquiry here.....
Maraming salamat render master............and all you guys...pati ako natutu din!

galing mo mag explain sir render master.....madaling intindihin yung procedure nyo....approved!!!!!

thanx mga sir....