Help to tent structure
4 posters
Help to tent structure
musta mga CGP? mga master tulong naman po paano ba gawin ang model ng tent structure sa cad yong pede po irender 3 days ko na iniisip di ko magawa gawa? patulong nman po? naka-attached po yong reference ko....
salamat ng marami..
salamat ng marami..
manex- CGP Apprentice
- Number of posts : 971
Age : 43
Location : Sampaloc, Manila, Brooke's Point, Palawan, Philippines
Registration date : 12/12/2008
Re: Help to tent structure
try mo sir sa lofting...gawa ka 4 circle sir,dalawang malaki at dalawang maliit. dalawa sa taas,ung dalawang malaki sa baba,dpat nka align cla sir.yun po...
mudju- CGP Newbie
- Number of posts : 100
Age : 40
Location : pangasinan
Registration date : 08/11/2009
Re: Help to tent structure
mudju wrote:try mo sir sa lofting...gawa ka 4 circle sir,dalawang malaki at dalawang maliit. dalawa sa taas,ung dalawang malaki sa baba,dpat nka align cla sir.yun po...
salamat sir pero do ko masyadong maintindihan sir pa-post ng screen shot?
manex- CGP Apprentice
- Number of posts : 971
Age : 43
Location : Sampaloc, Manila, Brooke's Point, Palawan, Philippines
Registration date : 12/12/2008
Re: Help to tent structure
please check the tutorial section..
http://www.cgpinoy.org/3d-studio-max-tutorials-f46/tent-project-t5036.htm
download the video and do it your self
http://www.cgpinoy.org/3d-studio-max-tutorials-f46/tent-project-t5036.htm
download the video and do it your self
Re: Help to tent structure
Sir e2 po....
mudju- CGP Newbie
- Number of posts : 100
Age : 40
Location : pangasinan
Registration date : 08/11/2009
Re: Help to tent structure
sir edosayla ok lng po.
mudju- CGP Newbie
- Number of posts : 100
Age : 40
Location : pangasinan
Registration date : 08/11/2009
Re: Help to tent structure
edosayla wrote:sa CAD pla pasensya ... akala ko tuloy sa max sorry po
ok lang po sir pede ko din pla gawin sa max don din nman po ako ngrerender..salamat malaking tulong po eto..
manex- CGP Apprentice
- Number of posts : 971
Age : 43
Location : Sampaloc, Manila, Brooke's Point, Palawan, Philippines
Registration date : 12/12/2008
Re: Help to tent structure
mudju wrote:Sir e2 po....
salamat ng marami sir..
manex- CGP Apprentice
- Number of posts : 971
Age : 43
Location : Sampaloc, Manila, Brooke's Point, Palawan, Philippines
Registration date : 12/12/2008
Re: Help to tent structure
ok lng po sir manex
mudju- CGP Newbie
- Number of posts : 100
Age : 40
Location : pangasinan
Registration date : 08/11/2009
Re: Help to tent structure
eto naman procedure ko
1. ngon 6-or 8 side ( this will be the guide for the tent shape
2. create some imaginaryline from corner going to its center
3. create polyline, one slot division of the ngon
4. create an arc on the polyline you have created
5. of side view, rotate the arc and the pline to your desired inclination.
6. top view - adjust the tip
this method can be make in many procedures
RuleSurf
- suftab1 = 24
- rulesurf ( select first the arc then the plines.)
- polar array it
Solid Extrude
-pedit ( join the arc and pline)
- extrude to desired height
-on side view slice the unwanted parts
- polar array it
render master- Game Master
- Number of posts : 3274
Age : 104
Location : riyadh, saudi arabia
Registration date : 27/09/2008
Re: Help to tent structure
eto naman kapag gusto mo dramatic ang dating ng tent
deriver from loft command
1. ngon, plus imaginray line
2. loft command
3. polar array
4. final
deriver from loft command
1. ngon, plus imaginray line
2. loft command
3. polar array
4. final
render master- Game Master
- Number of posts : 3274
Age : 104
Location : riyadh, saudi arabia
Registration date : 27/09/2008
Re: Help to tent structure
render master wrote:
eto naman procedure ko
1. ngon 6-or 8 side ( this will be the guide for the tent shape
2. create some imaginaryline from corner going to its center
3. create polyline, one slot division of the ngon
4. create an arc on the polyline you have created
5. of side view, rotate the arc and the pline to your desired inclination.
6. top view - adjust the tip
this method can be make in many procedures
RuleSurf
- suftab1 = 24
- rulesurf ( select first the arc then the plines.)
- polar array it
Solid Extrude
-pedit ( join the arc and pline)
- extrude to desired height
-on side view slice the unwanted parts
- polar array it
salamat ng marami sir another idea..bait nyo talaga...
manex- CGP Apprentice
- Number of posts : 971
Age : 43
Location : Sampaloc, Manila, Brooke's Point, Palawan, Philippines
Registration date : 12/12/2008
Re: Help to tent structure
render master wrote:eto naman kapag gusto mo dramatic ang dating ng tent
deriver from loft command
1. ngon, plus imaginray line
2. loft command
3. polar array
4. final
very impressive sir thanks for sharing...
manex- CGP Apprentice
- Number of posts : 971
Age : 43
Location : Sampaloc, Manila, Brooke's Point, Palawan, Philippines
Registration date : 12/12/2008
Similar topics
» Tutorial: Modelling tent structure in sketchup
» tent
» How to use Revit Structure?
» Tent Proj.
» Tensile Structure
» tent
» How to use Revit Structure?
» Tent Proj.
» Tensile Structure
Permissions in this forum:
You cannot reply to topics in this forum