site devt costing for design and construction

hi good am po, ask ko lang po kung magkano basically ung costing/pricing ninyo per sq mtr sa design and construction ng isang site devt? Or kung paano po kayo ng ccosting sa ganitong project. thanks po in advance.

depende cguro kung what kind of site develoment ang gagawin, kung for subdivision purposes,,cguro di naman tataas sa 1,000 pesos per square meter,,,im not really sure about it

monetteski wrote:hi good am po, ask ko lang po kung magkano basically ung costing/pricing ninyo per sq mtr sa design and construction ng isang site devt? Or kung paano po kayo ng ccosting sa ganitong project. thanks po in advance.

be specific lang po sir kung anong klaseng project..by category naman po kasi yan eh..tsaka yung scope of work..

aa_meneses wrote:

monetteski wrote:hi good am po, ask ko lang po kung magkano basically ung costing/pricing ninyo per sq mtr sa design and construction ng isang site devt? Or kung paano po kayo ng ccosting sa ganitong project. thanks po in advance.

be specific lang po sir kung anong klaseng project..by category naman po kasi yan eh..tsaka yung scope of work..

architect meneses, pano po pag residential? ranges from how much?

Masyadong malaki tong scope na hinihingi mo. Dapat specific. Ito kasi mangyayari nyan.

Pag sinabing site dev't, meaning ung paligid ng building. dalawang entities ngayon yan. yung civil works(meaning mga cecementohan, drainage system at mga pader. the other one is the landscaping design plus material for landscaping such as grass, shrubs and trees.

Usually, percentage of the construction cost ang usapan dyan. 3-6% depende sa mapag-aggreehan nyo.

Kung per SQM naman, kailangan mo malaman kung magkano ang cost ng mga per SQM ng mga engineers dyan at landscape contractor. plus add mo ung desire mong per SQM din for you design.

And per square meter (SQM) of you design will be based sa experience mo. makukuha mo ang rough computation either sa running rate dyan sa area nyo or sa percentage ng construction cost. You need to run the numbers para magkaron ka ng fix na personal mo. dapat hindi ka lugi.

Sinasabi ko to kasi you can't use my standards. baka malugi ka or masyadong mahal. Kailangan mo muna maguage kung ano ang patakaran dyan sa inyo.

Sa construction naman, nasa 13k to 16k per sqm and basic. 50k per sqm naman ang high end.. or more. good luck!

Example:

-4m na budget @ 250 sqm na bahay or site devt.

-150k-250k ang magiging design fee. so ang lumalabas is 600-1000 ang per sqm ng design.

-Design fee will include the following:
architects
structural
plumbing
electrical

-Output is a basic house, paint finish with cabinets(including kitchen), Yung mga furniture di pa kasama, more of suggestions lang.

-Kung gusto naman nila ng magandang kitchen, usually, sub-contractors ng modular kitchen (add-on cost sa construction to.)

So basically, ganito ang setup. more or less. depende nalang sa diskarte mo.

i agree with sir bokkins,,depende talaga sa location ng project. mas maganda cguro kung mg canvass ka muna ng material cost sa mga hardwares malapit sa site, cguro around 3-4 hardwares para marami kang comparison,,

like sa province, mas mura ang construction cost kasi mura ang labor,,

sir bokkins is right.... masyado malaki ang scope... actually ung design pa nga lang ng site? malaki n un... kung s registered or licensed architect my corresponding na percentage un depende s project cost and sa laki ng project... pero sometimes ung mga contractor rough estimates na lang nila according to per square meter ng project... sa residential project for example 15 to 20k per square meter fully furnished but it depend pa rin s cost of materials s market and ung availability ng mga materials mo.
hope this one helps sir.... good luck!!!

novice wrote:

aa_meneses wrote:

monetteski wrote:hi good am po, ask ko lang po kung magkano basically ung costing/pricing ninyo per sq mtr sa design and construction ng isang site devt? Or kung paano po kayo ng ccosting sa ganitong project. thanks po in advance.

be specific lang po sir kung anong klaseng project..by category naman po kasi yan eh..tsaka yung scope of work..

architect meneses, pano po pag residential? ranges from how much?

bossing musta? about sa tinatanong mo nasagot na nila. pero kung gusto mo malaman yung sakin i can share it.
low end/cost - 8k to 13k per sq. m.
mid-end - 15k to 20 per sq. m.
high end - 25k to 35k per sq. m.
(price ko lng po ito)

this includes the built in cabinets, bathroom fixtures, lighting fixtures, paints, flooring finishes, doors & windows, fence( pero depende sa area, pag 100 to 200 sq. m. pwede pa isali ang fencing sa estimated cost). sa ganitong costing bossing ok nato para skin kahit d gaano ka laki yung kita mo, sa 4 million na project under mid end na category kikita ka ng 500k maximum/200 minimum depende rin sa pag diskarte mo sa construction, if effective yung PERT CPM ( project evaluation review technique critical path method) mo. usually kasi nalulugi yung architect/engineer/contractor dahil sa delays ng construction. the earlier you finish it the better. kasi mas malaki yung masa save mo. kaya importante na marunong ka mag diskarte sa distrubution ng work load sa mga tauhan mo. for example sa isang two(2) storey residential building. habang nag la lay-out may nag bebend na rin ng mga bars for footing and column at i aasemble na nila at may gagawa rin ng forms for columns para pagkatapos maghukay pwede na nilang ilagay yung footing at column reinforced bars at buhusan (3/4 ng total lenght of column) after. then isunod mo yung wall footing or footing tie beam if meron. after this pwede kana magsimula gumawa ng scaffolds at form works at reinforced bars for your beam and slab ( but if you have metal scaffolds much better kasi mag aassemble kana lng, kaso medyo ay kataasan lng yung rent niya) at i lay out yung roughing-ins sa plumbing at electrical at kung tapos na lahat pwede kanang mag padeliver ng pre-mix concrete para mas mabilis at d ka abutin ng madaling araw sa kaka antay sa 1 bagger mixer at pwede mo na ring isabay sa schedule ng preparation ng buhos for 2nd floor slab yung piling of chb sa ground floor, lay out of roughing-ins of plumbing and electrical at pagkatapos compacting of earthfill sa ground floor at pag assemble ng door at window jamb, trusses ( pero kung may mga adjustments sa plano mas ideal na i actual yung pag assemble ng trusses). mas ok if may additives yung pre mix concrete mo na hardener para d ka na mag aantay ng 28 days curing period, pero kung di ka nman nagmamadali ok na rin na wala, after curing period you can start to pile chb wall partitions, installation of form works for roof beam then sa ground floor pwede ka na ring magbuhos sa slab on fill while plastering the outer side of the walls. after mabuhosan ang roof beam, pwede kana mag install ng trusses, purlins at roofing at water proofing sa mga toiket and bath sa 2nd floor kasabay nito ang paglalagay ng ceiling joist sa ground floor, door at window jambs. dami pa kulang dito, eto lng yung basic na ginagawa ko sa construction. sana may naitulong ako sa inyo..

about nman sa site development involve dito yung shape of lot, set backs, existing structures within, orientation (sun and wind path), existing utilities with in the site, topography, etc. bout landscaping naman, yung rate ko eh nasa 1000-1500/ sq. m.(for garden soil, plants etc) then kung may mga water features (waterfalls, ponds, etc.) separate mo ito.

Galing bro meneses! Thanks for sharing!

hi good afternoon po, thanks po sa mga nagreply sa question ko. now meron na po ako idea sa costing.

about po sa design fee, nowadays po ba natutupad ung percentage per project as per uap doc?

monetteski wrote:hi good afternoon po, thanks po sa mga nagreply sa question ko. now meron na po ako idea sa costing.

about po sa design fee, nowadays po ba natutupad ung percentage per project as per uap doc?

honestly hindi na, im not sure sa mga big firms pero kung freelancer ka mahihirapan ka na isingil yung fee mo based sa UAP doc.,,

monetteski wrote:hi good afternoon po, thanks po sa mga nagreply sa question ko. now meron na po ako idea sa costing.

about po sa design fee, nowadays po ba natutupad ung percentage per project as per uap doc?

about sa design fee nman d natutupad yung 10% minimum design fee (for residential bldg). based sa experienced ko nasa 3% to 5% lang yung fee ko. baguhan pa kasi, pero pag naka pag establish kana ng name yun pwede kana maka singil above minimum...

hmmm dami ko natutunan dito ah. salamat mga architects !

galing sir aa_meneses! thanks for sharing!