need help - 3dsmax 2012
3 posters
Page 1 of 1
need help - 3dsmax 2012
Please help me on how to illuminate the encircled part of the attached drawing. i used vray sun and vray hdri for the lightings. my camera is vray physical camera with shutter speed=125 & iso=80. i cannot adjust anymore the setting of my vray camera due to the exposure. ( maoverexpose)
Thanks for your reply. ^_^
drawing
Thanks for your reply. ^_^
drawing
3nr1- Number of posts : 4
Age : 45
Location : Laos
Registration date : 02/06/2009
Re: need help - 3dsmax 2012
Just add vraylights on your entrance and balcony if you want to illuminate those areas. Also, apply vraylightmtl on you lamps to add realism.
But for this scene, I think it's just enough that it's not illuminated since it's a day scene. Use it only on night and dusk scenes.
But for this scene, I think it's just enough that it's not illuminated since it's a day scene. Use it only on night and dusk scenes.
Re: need help - 3dsmax 2012
thanks Sir bokkin,bokkins wrote:Just add vraylights on your entrance and balcony if you want to illuminate those areas. Also, apply vraylightmtl on you lamps to add realism.
But for this scene, I think it's just enough that it's not illuminated since it's a day scene. Use it only on night and dusk scenes.
I just see it as too dark cause in reality the ceiling light should be much more visible.
How about the grain sir , how can i minimize the grainy of the dark/shadow area. if i try to zoom it , it doesn't look smooth.
Should the antialising filter will work if i change settings? Can you share some thoughts on how can i improve it more. Thank you and more power. i hope later i can post my renders here in CGPinoy.
3nr1- Number of posts : 4
Age : 45
Location : Laos
Registration date : 02/06/2009
Re: need help - 3dsmax 2012
Try to link the sun to hdri and try to adjust the sun's altitude a bit lower like 10'oclock or 9'oclock just to see the difference. For the grain I think you need to adjust noise threshold to 0.005 or lower like 0.002 but it will add render time. Hope it helps!
Lance Avila- CGP Newbie
- Number of posts : 50
Age : 44
Location : Philippines
Registration date : 18/05/2013
Re: need help - 3dsmax 2012
Lance Avila wrote:Try to link the sun to hdri and try to adjust the sun's altitude a bit lower like 10'oclock or 9'oclock just to see the difference. For the grain I think you need to adjust noise threshold to 0.005 or lower like 0.002 but it will add render time. Hope it helps!
HI Sir Lance, Thanks for the reply, i'll try to follow your advice and check it how it will differ on my first render.
3nr1- Number of posts : 4
Age : 45
Location : Laos
Registration date : 02/06/2009
Similar topics
» 3dsmax 2012 & 3dmax Design 2012 both on 1 machine?
» 3dsmax 2012 file for 3dsmax 2009?
» 3dsmax 2012 or 3dsmax 2013
» autocad to 3dsmax 2012
» introducing 3dsMax 2012
» 3dsmax 2012 file for 3dsmax 2009?
» 3dsmax 2012 or 3dsmax 2013
» autocad to 3dsmax 2012
» introducing 3dsMax 2012
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|