Show Me Your Rig

First topic message reminder :

post your OWN RIGS here.... low-end or high-end, the most important is, you are the owner.

@effreymm: wheeewwwwww... sandy bridge.. ano specs nito bro?
saan ka bumili ng processor wala pang ganyang processor dito ah... ayos!!!! sana nag i7 2600K ka na lng para makapag OC ka..

[img][/img]
[img][/img]

kumusta CGP? my share

@sir valiant.. na share mo na pala si senior.. hehe ito po yung junior ng rig mo..

PC SPECS:

Motherboard Gigabyte P67A-UD7 B3
Processor Intel core i7 2600K 3.4 Ghz
Air Cooler Coolermaster V8
PSU Corsair HX1000W
EVGA 1GB 560 Ti FSB
Corsair 8GB 1600Mhz
1TB 6 Gb/s HDD
LG CD/DVD Writer
Casing Coolermaster haf 922
mouse & keyboard generic (ubos na pera generic na lang, mahal ang branded )

walang monitor sa tv muna kinabit.. hehe..
syensya na po low quality yung cam..

@sir mokong >>> panalo na yang rig mo bro, junior lang ang case pero ang laman e senior thanks for sharing brader

Valiant wrote:@sir mokong >>> panalo na yang rig mo bro, junior lang ang case pero ang laman e senior thanks for sharing brader

patingin naman ng interior bro.. hanep talaga ang sandy bridge.. cool

mokong wrote:

Valiant wrote:@sir mokong >>> panalo na yang rig mo bro, junior lang ang case pero ang laman e senior thanks for sharing brader

patingin naman ng interior bro.. hanep talaga ang sandy bridge.. cool

sige bro pagdating nung fan controller. natry mo na bang overclock bro? mine is 4.4GHz for now running OCCT (8 hours na, planning till 2:00am for 24 hours) 68 degrees Celcius maximum pa lang and mobo 30 degrees Celsius. I guess 7.6 came from the Solid State Drive. Napakalaking tulong talaga ng SSD.

oo nag overclock na ako 4.4ghz din.. yung temp. pumapalo sa 74 deg. celsius pero hindi ko ni run sa occt.. what i did is nag render ako high settings, all cores 100% then check sa temp... i use core temp. at real temp. software, the most reliable.. ikaw ano gamit mo?

ang sabi ng intel the allowable temp for sandy is 72.6 deg. 24/7.. isa sa cguro dahilan sa kaya umabot ako sa 74 is the thermal paste hindi kasi branded gamit ko.. or maybe the air cooler, much better cguro pag liquid cooler gamitin.. but now i stick to 4.2ghz muna turbo boost, may one click overclock kasi ang gigabyte up to 4.2 ghz.. ang bilis ng render bro pag naka overclock, pero watch out lang sa temperature..

mokong wrote:oo nag overclock na ako 4.4ghz din.. yung temp. pumapalo sa 74 deg. celsius pero hindi ko ni run sa occt.. what i did is nag render ako high settings, all cores 100% then check sa temp... i use core temp. at real temp. software, the most reliable.. ikaw ano gamit mo?

ang sabi ng intel the allowable temp for sandy is 72.6 deg. 24/7.. isa sa cguro dahilan sa kaya umabot ako sa 74 is the thermal paste hindi kasi branded gamit ko.. or maybe the air cooler, much better cguro pag liquid cooler gamitin.. but now i stick to 4.2ghz muna turbo boost, may one click overclock kasi ang gigabyte up to 4.2 ghz.. ang bilis ng render bro pag naka overclock, pero watch out lang sa temperature..

hahaha pareho pala tayo na auto muna para makita ng mabilisan and so far satisfied pa naman kaya i give it a go. I also selected fast muna natatakot ako sa extreme e baka maluto hehehe. Pwede ngang thermal compound bro pero safe pa rin naman ang 74. Ginamit ko rin lang ung naka-apply na sa H70. Obserbahan ko muna bago ko lagay ung Arctic Silver 5. sayang nga hindi ko muna natest kung paano ang performance pag defaults masyado kasing excited lol. We are on the safe side naman although usually ang setup ng autofine tuning is for 50+++ na multiplier ng 2600K and there are some releases na 48+++ lang daw... kasi the board says "Autofine Tuning Successful" daw e. In your 74 degrees naka-aircon ba? try mo pre walang aircon. OCCT ang gamit ko pre. Nasa external HDD ung coretemp at real temp e... matapang ang anti-virus ko sa ngayon maraming mabuburang files kaya palitan ko muna

may aircon na yan pre.. isang core lng naman umabot ng 74 yung tatlo around 68 to 70.. kasi yung reading core at real temp is every core.. but i guess kung final render ka na lang mag overclock wala namang problema hindi basta2 masisira processor mo.. pero im sure the real figure for the maximum temp for sandy is 80 degrees.. sige try ko gumamit ng OCCT..

mokong wrote:may aircon na yan pre.. isang core lng naman umabot ng 74 yung tatlo around 68 to 70.. kasi yung reading core at real temp is every core.. but i guess kung final render ka na lang mag overclock wala namang problema hindi basta2 masisira processor mo.. pero im sure the real figure for the maximum temp for sandy is 80 degrees.. sige try ko gumamit ng OCCT..

sabagay nga... nakakatakot lang at nakakapagod na palaging overclock ang processor once na magrerender... kelangan kasi ulit magtest for stability every adjustment. i guess para nasa safe side 4.2GHz is a very nice value ung sa akin kanina kinalikot ko ulit... kinaya naman up to 4.9GHz but still, I settled for 4.4GHz para walang kaba... congrats on your build nga pala bro

Congratz din bro.. kitakits na lang pag may EB..

Hi All! long time no post.. just want to post my gf's new rig:

Mesh_Rayz' Alienware M14xR1:




Intel CoreTM i7 2630QM Processor (2GHz/6MB cache)
6GB 1600MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
750GB 7200RPM Hard Drive
3.0GB DDR3 NVIDIA GeForce GT 555M using NVIDIA Optimus technology (Stealth Black)
ntel Ultimate N WiFi Link 6205 a/g/n 2x2 MIMO Technology

for more info: M14x

abl_langs wrote:Hi All! long time no post.. just want to post my gf's new rig:

Mesh_Rayz' Alienware M14xR1:




Intel CoreTM i7 2630QM Processor (2GHz/6MB cache)
6GB 1600MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
750GB 7200RPM Hard Drive
3.0GB DDR3 NVIDIA GeForce GT 555M using NVIDIA Optimus technology (Stealth Black)
ntel Ultimate N WiFi Link 6205 a/g/n 2x2 MIMO Technology

for more info: M14x

wow.!!

Sir yung akin po nasa facebook ko pa wala pa akong time ma post dito gawin ko na lang sa friday na ma post ko dito.

look nyo na lang po sa facebook ko,
heto po yung arch_bmagalang@yahoo.com

salamat po ng marami.

heto po yung sa akin

https://www.facebook.com/media/set/?set=a.1893983302522.220049.1029725285

mga master papano po bang mag upload ng photo dito???

bmagalang wrote:mga master papano po bang mag upload ng photo dito???

sir heto ang link

https://cgpinoy.forumtl.com/t2-how-to-post

sige po sir salamat try ko po ngayon.

https://2img.net/r/ihimizer/i/mypco.jpg/

https://2img.net/r/ihimg/photo/my-images/829/mypc.jpg/

bmagalang wrote:sige po sir salamat try ko po ngayon.

https://2img.net/r/ihimizer/i/mypco.jpg/

nice rig bro ganda ng led lights! medyo hindi lang maayos ang wire management

hello! nice to be back! hehehe....

konting dagdag kaadikan. hahaha....

ASUS GTX 560 Ti





paki visit na lang din po yung blog ko regarding this videocard.
http://www.fusiondub.com/?p=441

(leave na din kayo ng comment) maraming salamat!

Nice one sir necrolyte, dual gpu fan.. whewww.. tindi nito sa games..

thanks sir mokong

necrolyte wrote:hello! nice to be back! hehehe....

konting dagdag kaadikan. hahaha....

ASUS GTX 560 Ti





paki visit na lang din po yung blog ko regarding this videocard.
http://www.fusiondub.com/?p=441

(leave na din kayo ng comment) maraming salamat!

matindi to bro!!! Congrats!

after some tweaking ulit running a newbie 4.5GHz via manual oveclocking. Nakumpleto na rin.
[img][/img]
[img][/img]
[img][/img]
[img][/img]

wow.. tindi nito...